VR practical training
Practise real field skills in virtual reality
Nawadir adds virtual-reality labs to 477 courses in 17 sectors. Participants put on a headset and carry out the actual task: isolate a pump, rack out a breaker, enter a confined space, inspect a weld.
Why train in VR
Safe
Practise high-risk tasks such as H₂S release, confined space rescue, MV switching or well kicks with zero risk to people or plant.
Repeatable
Each participant repeats a procedure until it is right, instead of watching one demonstration.
Measured
Every step, error and completion time is scored, so you see who is competent before they go to site.
Real equipment, no downtime
Train on pumps, valves, switchgear and rigs without taking live equipment out of service.
How it works
Pick any course marked VR, or ask us to build a scenario for your own equipment.
We ship standalone headsets (Meta Quest 3 class), a trainer tablet and safe play areas to your site or classroom.
Participants rotate through VR stations, typically 2–3 hours per day alongside the classroom sessions.
You receive a performance report per participant: steps completed, errors, time and final score.
VR options
VR add-on
A VR lab added to any classroom course marked VR, in our cities or in-house.
VR skills day
A one-day, practice-only VR session for teams who already know the theory.
Custom VR scenario
A virtual replica of your own unit, equipment or procedure, built from your drawings and photos.
VR lab in your academy
Headsets, scenarios and licences installed at your training centre, with train-the-trainer.
VR is priced per request, based on group size, number of scenarios and location. Ask for a quotation with any course.
Scenarios by sector
- Drill floor and well-control kick drill
- Wellhead and Christmas tree valve operations
- H₂S release and escape on a production pad
- Pig launching and receiving
- Tank farm gauging and sampling
- Offshore platform muster and evacuation
- Process unit start-up and shutdown sequence
- Field walk-down and P&ID tracing
- Relief valve lifting and flare response
- Furnace light-off and burner management
- Line opening and blinding
- Loss-of-containment emergency response
- Centrifugal pump strip-down and reassembly
- Laser shaft alignment
- Mechanical seal replacement
- Bolted flange joint tightening sequence
- Compressor inspection and valve replacement
- Rigging and crane lift planning
- Medium-voltage switching and racking
- Lockout-tagout and test-before-touch
- Arc-flash boundaries and PPE selection
- Transformer inspection and oil sampling
- Substation fault-finding
- Cable termination and jointing
- Transmitter calibration with HART communicator
- Control valve stroke test and diagnostics
- Loop check from field to DCS
- SIS proof testing
- Gas detector bump test and calibration
- Control-room alarm flood exercise
- Site safety inspection walk-through
- Scaffold inspection and tagging
- Excavation and shoring checks
- Rebar and formwork inspection before pour
- Tower crane signalling
- BIM model walk-through on site
- Industrial robot teach-pendant programming
- Cobot cell safety set-up
- CNC machine set-up and first-article check
- Production-line changeover (SMED)
- Cleanroom gowning and behaviour
- Battery-cell line operations
- Wind turbine climb and nacelle rescue
- Solar PV string fault-finding
- BESS thermal-runaway emergency response
- Hydrogen leak detection and isolation
- Electrolyser start-up procedure
- Radiation-controlled area entry
- Vibration data collection route
- Infrared thermography survey
- Permit-to-work and isolation walk-through
- Turnaround job-site preparation
- Bearing replacement
- Root-cause investigation on a failed asset
- Ultrasonic thickness and flaw scanning
- Visual weld inspection with gauges
- Magnetic particle and penetrant testing
- Coating DFT and holiday testing
- Pressure vessel internal inspection
- Radiography safety zone set-up
- Confined space entry and rescue
- Working at height and fall arrest
- Fire extinguisher selection and use
- Hazard spotting in a live plant
- H₂S release and SCBA donning
- Incident scene investigation
- Virtual classroom with simulated student behaviour
- Lab safety for science teachers
- Designing VR lessons for your subject
- Field trip to a virtual factory
- Presentation and public-speaking rehearsal
- School emergency drill
- RO membrane replacement and CIP
- Chlorine leak emergency response
- Pump station operation
- Wastewater plant walk-through
- Water sampling and lab testing
- Leak detection in distribution networks
- Underground mine evacuation
- Haul truck pre-start inspection
- Kiln and cooler inspection
- Conveyor isolation and belt change
- Molten metal handling safety
- Blast area clearance
- Aircraft walk-around inspection
- Engine borescope inspection
- Ship engine-room fire response
- Bunkering transfer and spill response
- Enclosed-space entry on ships
- Airside ramp safety
- Hand hygiene and PPE donning/doffing
- Medical equipment preventive maintenance
- Cleanroom aseptic technique
- Hospital fire evacuation
- Mass-casualty triage
- Biosafety cabinet operation
- Greenhouse climate and irrigation control
- Food-plant hygiene and HACCP walk
- Farm machinery safety
- Cold-store operations
- Drone crop-scouting mission
- Hydroponic system maintenance
Request VR training
VR is priced per request, based on group size, number of scenarios and location. Ask for a quotation with any course.